Install a door sweep on one of the primary outside doors, which had a horrible draft. If you look at the door bottom and see sunlight or can feel the cold air, you could probably benefit from installing a door sweep brush.

How to install door sweeps for metal doors? Not all doors are universal. You will most likely have to trim the door sweep brush to fit your door. As well as determine the right height to install your door sweep brush so that it closes the gap between your door and your threshold. The vinyl of the door sweep brush can be cut with scissors and the aluminum can be trimmed with a hacksaw. You should clip the trimmed edge tightly after trimming, or it will lose filament quickly from the cutting edge. Hold your door sweep in place and mark the location of the slotted holes in the door sweep brush onto your door. Then we had to make holes in the door, It would have been much easier to drill into with drill bits, then mount the door sweep brush on your door. Just make sure you don’t place the door sweep too high originally because you do not want to have to drill any more holes in your door.

How to install door sweeps for metal doors? Aoqun can tell you more. Guangzhou Aoqun Brush Industry Technology Co., Ltd. is a large brush manufacturing enterprise combining design, development, production, sales and service. Brush, Strip Brush, Cleaning Brush, Roller Brush and different other products with "Aoqun" brand sell well in more than 50 countries around the world, professional in over 30 industries, also cooperating with the world-famous enterprises, like CRRC Group, Schinder, Hitachi, Kone and Combi etc.