020-84858360
020-84858360
Mr. Li, a customer of the barn door, contacted Aoqun to ask if there is a brush seal barn with a height of 120mm. Because Mr. Li’s recent order requires a brush seal barn with a higher height, the previous supplier sent several samples. The drooping is severe, completely affecting the seal. So Mr. Li thought of Aoqun and asked if Aoqun had made similar specifications. I learned that Mr. Li’s company is a factory specializing in the production of barn doors. The 120mm high brush seal barn needed this time is a brush seal barn for export to Australia. It is required to not sag and leak light and has good resilience. The diameter of the filaments used in the previous brush seal barn was too small, and the bottom width of the brush seal barn was too small, which caused the brush seal barn to sag automatically if it was too high. In view of this situation, it is suggested that Mr. Li can change the bottom width of the brush seal barn from 4mm to 6mm; the diameter of the brush wire is changed from the previous φ0.3 to φ0.5; and it is matched with the M06 door of Aoqun Company. Side aluminum strips, so that the 120-high brush seal barn will be sagging. In order to ensure that customers can see the most realistic results, Mr. Jiang also sent a sample of 120mm high brush seal barn to Mr. Li that afternoon. Three days later, Mr. Li received the sample and immediately asked to place an order for 500-meter brush seal barn, because after Mr. Li got the sample mailed by Mr. Jiang, he immediately felt that the quality of Aoqun was indeed different, and the sample did not appear to sag at a glance. So he was relieved to place an order for Aoqun.
read more
In the middle of last month, I received a call from Mr. Wang, a buyer from a wood factory in Aoqun. He said that a batch of goods from his company was returned by the customer. The reason was that the sealing of the brushes in the woodworking was not good enough. Therefore, Mr. Wang searched for a vacuum brush for cnc manufacturer, and later found Aoqun after screening. Since Mr. Wang has just joined their company, he is not familiar with woodworking products, nor is he familiar with vacuum brush for cnc products. I immediately went to Mr. Wang's company to investigate and found that the vacuum brush for cnc in the carpenter returned was all brushes. Because the arrangement of the pores of the brush base is relatively scattered, the spacing is large, resulting in insufficient sealing of the brush. In this case, I immediately recommended Mr. Wang to use the iron strip brush, and at the same time, I took out a sample of the Aoqun strip brush and compared it to Mr. Wang on the spot. The Aoqun hair brushes are dense and uniform, with neat rows, no abnormal light leakage, and sealing is very good. In the end, Mr. Wang chose to place a batch of vacuum brush for cnc orders with Aoqun, and reinstalled the brushes into these cabinets, helping his company's customers to solve the problem smoothly.
read more
Aoqun has gun cleaning brush kit scientific research and design Capabilities. Advances in technology, automation, and computer-aided design and manufacturing have helped propel Aoqun’s R&D ability to deliver world-class gun cleaning brush kit to our customers. Aoqun Brush carefully researches the gun cleaning brush kit needs of customers, and the gun cleaning brush kit designed for customers has been popular in Europe, America and other regions for more than 10 years, and is deeply loved by customers.
read more
In June, I received an email from Max in the United States. He said that the quality of the 64 oz steel bottle cleaning brush ordered by other manufacturers last time caused the customer to return the product, and the orders were greatly reduced. Max said his needs the 64 oz steel bottle cleaning brush sample for confirmation and the bulk order will be inspected by a third party, Max asked us if we can do it. Our sales engineer responded promptly within one minute of receiving Max’s email. There’s a handle in the 64 oz steel bottle cleaning brush which purchased from other manufacturers and Max didn’t arrange inspection when receiving brushes, but the handle was easy to pull out, which leads a customer complaint. Our sales engineer showed the video to Max that our 64 oz steel bottle cleaning brush was pulled for 10 seconds with a force of 4 kg, and it was still not pulled out. Moreover, we also showed other cases that our brushes approved by third party inspection of other customers. Max was very satisfied and asked us to arrange a sample, we sent it in 3 days. Max received the sample 5 days after we sent, sample was passed. Max placed an order of 3,000 64 oz steel bottle cleaning brush and the third-party inspect the goods, result in the pass rate of 100%, Max is very satisfied and order another 10,000 64 oz steel bottle cleaning brushes again.
read more
The development of an enterprise is also inseparable from several important milestones. Aoqun Brush, a large-scale manufacturer of door sweep long, a leader in the door sweep long industry, has several important milestones: In 2007, it designed brushes that meet the standards of A17, EN115, B44 and other countries in the world; took the lead in applying nylon corrugated brushes to escalators in London and Guangzhou subway projects in the United Kingdom. In 2012, it supplied 375,000 meters of brushes for government projects such as Beijing Metro, Wuhan-Guangzhou High-speed Railway, and Guangzhou-Zhuhai Light Rail. In 2015, it passed the review of the Hong Kong Metro and applied the world's first UL94-V0 nylon flame-retardant yellow brush to Hong Kong municipal engineering projects. It was constructed by KONE, Otis, and Schindler, and was used in the Hong Kong Metro with 4 million passengers per day. In 2019, Aoqun, a large-scale manufacturer of door sweep long, continued to make persistent efforts to win brush projects in Russia, Malaysia, Chile, Singapore, Hong Kong and other regions one after another. Large-scale manufacturer of door sweep long-Aoqun Brush Industry is walking on the wider road and creating new glory!
read more
At the beginning of last month, I received a call from Mr. Zhang from a vacuum cleaner company in Aoqun. He said that the vacuum cleaners his company usually produces need a vacuum filter brush. Suppliers are often out of time because they are in other markets, and the brush products they provide vary in length, unevenness, and after-sales. This time I call for consultation to understand Aoqun's situation and prepare to develop a new supplier. After hearing what Mr. Zhang said, I explained the development history and company status of Aoqun to Mr. Zhang. At the same time, I also invited Mr. Zhang to visit the factory, and Mr. Zhang also enthusiastically accepted it. During the later visit and inspection, I took him to watch various advanced vacuum filter brush machines on the Aoqun production line, and explained that vacuum filter brush filaments of varying lengths and unevenness can be passed through the flying process. Refined operations and manual trimming and inspection procedures after flying can be avoided. After Mr. Zhang’s on-site investigation and understanding, Mr. Zhang finally named Aoqun as the preferred supplier of vacuum filter brush for his company, and he was very satisfied with the quality and service of the vacuum filter brush supplied by Aoqun.
read more
scan to wechat
scan to wechat
