020-84858360
020-84858360
Brushes made of processed horsehair are called horsehair brushes. Since yak hair is similar in quality to horse hair, brushes made of yak hair are also collectively called horse hair brushes. There are mainly the following types of horsehair brushes: horsehair can be used to make polishing wheels, horsehair cleaning brushes, horsehair makeup brushes, horsehair strip brush rollers, etc. The application effect of the horsehair brush roller is better than that of the ordinary brush roller. It belongs to the secondary development of the brush roller. The horsehair brush roller is more prominent than the ordinary brush roller in terms of wear resistance and corrosion resistance. It is usually used to treat Surface polishing, waxing and glaze sealing of leather, floor, furniture, etc. The main features of the horsehair brush are that the bristles of the horsehair tail are soft, antistatic, highly absorbent, and have a good cleaning effect. Main material made: The main material is the processed horsehair and yak hair. The horsehair is soft and will not become warm due to the weather cooling, and the horsehair is resistant to alkali corrosion. Horsehair brushes and Horsehair brush roller main purpose: Horsehair brushes are mainly used for civil and industrial purposes. Wide range of civil uses. It is mostly used for painting, cleaning, and daily life brushes. Horsehair brushes are mostly used for surface treatment and polishing in industry. Because horsehair has the characteristics of softness, corrosion resistance and no damage to the working surface, horsehair brushes are also mostly used for dust removal and oil removal of cutting-edge instruments. Most of the raw materials for horsehair come from Outer Mongolia, Northeast China. Horse hair can be divided into: horse hair, horse body hair, horse tail, horse hoof hair, etc.
read more
The way a garage door works is very simple, up and down, left and right, open and closed again and again, year after year. Suddenly one day it doesn't work very well, there is a problem somewhere, maybe it takes simple maintenance and quick repairs to continue working. To inspect the corners of your garage door step-by-step: 1. With prolonged use, the rollers and tracks of the garage door are worn out, if you don't remember when it was last cleaned, use a good brush to clean the rollers and tracks now. Apply lubricant, or replace rollers that are not smooth. 2. To tighten the hardware. Various hardware screws can loosen due to the vibration of a bulky garage door as it slides, including the overhead brackets for the garage door, and the screws for the rails. Make sure that the screws in these parts are firm, and loosening the screws is a more dangerous thing. 3. The sealing brush of the garage door is a very important part to prevent insects from entering the garage, bite and destroy, and prevent dust from entering the garage. Therefore, it is necessary to check the garage door sealing brush at a certain time and replace it in time. 4. The long-term exposed side of the garage door has been eroded by rainwater and needs to be painted so that it will not be so easily oxidized and eroded. These are some of the problems I found in the maintenance of the garage door to pay attention to, I hope it can help you, and there are other garage door problems, I hope you can also come to communicate.
read more
Fast rolling shutter doors, also known as fast soft shutter doors, can always be seen in food, chemical, textile, electronics, supermarkets, refrigeration, logistics, warehousing, and other fields. It can maintain a clean environment for indoor places, such as combined with roller shutter door sealing strip brush, the effect is better. The roller shutter door sealing strip brush is used in combination with the aluminum alloy base and the sealing strip brush. Common aluminum alloy bases include h-type, F-type, Y-type, and T-type, and aluminum profiles of different specifications can be customized according to the use environment; sealing strip brushes are generally made of nylon, because nylon is soft, resilient, and durable. It is not deformed by grinding, and the sealing effect is good, which saves replacement costs for rolling shutter doors that are frequently opened and closed. Rolling shutter door installation sealing strip brush also has the functions of thermal insulation, heat insulation, sound insulation, dustproof, waterproof, insect and rat prevention, energy saving and environmental protection, it is indeed a "smart thing"! Aoqun Brush Factory can customize a variety of door seal brushes (such as garage doors, revolving doors, sliding doors, KFC doors, screen doors, etc.) The customer's door body needs to use drawings and samples, design and customize the aluminum alloy base sealing strip brush.
read more
The solar photovoltaic panel cleaning brush can be designed into spiral brush rollers, flocking brush rollers, disc brushes, and other shapes according to the cleaning equipment. Solar photovoltaic cleaning brushes are widely used in ground photovoltaic power station cleaning, color steel tile factory roof photovoltaic power station cleaning, photovoltaic greenhouse cleaning, roof photovoltaic power station cleaning, and ground photovoltaic power station cleaning at different heights. Photovoltaic solar panels mainly rely on absorbing solar energy and converting it into electrical energy. Power generation, cleaning as required can ensure the cleanliness of the surface of the photovoltaic panel, which is conducive to absorbing as much sunlight as possible, thereby ensuring the power generation; if the modules accumulate dust for a long time, not only the power generation will be lost, but also a hot spot effect will occur, resulting in Component life is short and even damaged; therefore, it is necessary to constantly pay attention to the cleanliness of components, and clean them properly to ensure the power generation. The solar panel photovoltaic cleaning brush roller has always been a very friendly topic in recent years. With the rise of the solar photovoltaic industry, the demand of manufacturers for cleaning the solar brush roller has also greatly increased. The brush roller has been deeply used in the industry in the past. With the change of the brush, the brush roller is also constantly changing. The rise of brush rollers has also brought great results. Cleaning the photovoltaic panel brush in order to better keep the photovoltaic panel clean. The formation of brushes also contributes to the enhanced effect of photovoltaic panels. Better highlight the rise of photovoltaic panels in the field of brushes. The brush industry is also constantly changing. Solar Panel Photovoltaic Cleaning Brush In the past, the industrial brush with hair planting can better understand that the brush is in bundles, but now in order to better strengthen the change of the brush, the brush is carried out in a winding method. The installation of brushes has also been greatly changed. No matter how the brush is produced and manufactured, the brush roller is essentially the same material, but the processing method is different. There are pros and cons to the effect.
read more
The global automobile manufacturing industry is advancing by leaps and bounds, changing with each passing day, especially the overall level of the auto parts industry is developing rapidly. The technical quality requirements of auto parts are also gradually improved. As an important indicator affecting the quality and reliability of auto products, cleanliness has attracted people's attention. During the processing process, the impurities attached to the surface of the parts will affect the fine stamping process. The surface quality of the parts will be affected, and the shape accuracy of the parts will be affected, resulting in complex grinding after stamping, and in serious cases, it will be scrapped. Therefore, in order to ensure cleanliness, auto parts must undergo a strict cleaning process between the processes before processing, and the cleaning equipment includes the use of brush rollers. Brush roller As one of the factors affecting the surface quality, the cleaning machine equipment, after long-term production loss, the cleanliness of the blanks deteriorates year by year. Even if many possibilities of cleaning problems for the blanks can be gradually eliminated, the effect is not ideal, so the equipment is put into production. From then on, attention must be paid to the guide roller, brush roller, and squeeze roller of the cleaning machine during PM maintenance. The quality of the blade when the uncoiler is formed directly affects the number of burrs on the edge of the material. If the uncoiler cutter is dull, there will be more burrs on the edge of the material. Since the guide roller is made of polyurethane, before entering the punching line for punching The polyurethane on the surface of the guide roller will be damaged during cleaning, that is to say, when the equipment is put into production, the polyurethane on the surface of the guide roller may be damaged by the material with a large burr, so the advanced cleaning machine has high requirements for the burr of the material. , the control of burrs in actual production cannot be done well. The utility model relates to a high-speed line cleaning machine. The function of the cleaning machine in the high-speed press line is to clean up the oil stains and impurities on the surface of the board before pressing the board. The main components are a pair of polyurethane guide rollers, brush rollers, cleaning liquid nozzles, squeeze rollers, and so on. The plate is first entered by the polyurethane guide roller, and then the oil stains on the surface of the plate are washed off under the action of the cleaning liquid and the brush roller, and then the whole cleaning work is completed after being squeezed by the squeeze roller, and the next process is entered.
read more
Nowadays, many young people are particularly fond of custom-made furniture installation. When installing furniture, some detailed tutorials on solid wood installation steps still need to be very clear. For example, solid wood doors need to be installed at home. When installing solid wood doors, you need to Knowing the steps to install a custom solid wood door, let's follow the left and right editors to learn more about it! Installation conditions: 1. The conditions for the installation of customized solid wood doors must be the installation method of reserved holes, and it is forbidden to drill holes while installing. 2. If necessary, the installation can be carried out only after the installation of the groundworks at the entrance is completed. Material preparation: 1. Prepare the materials and appliances that need to be prepared to install the solid wood door to avoid omissions, such as hammers, screwdrivers, electric drills, etc., and check whether the parts are perfect and not damaged. 2. Check whether the size of each component is appropriate and whether the size of the door opening is consistent with the position where the door cover needs to be installed. 3. Prepare screws, styrofoam, glue, door sealing brush, and other tools. Detailed tutorial on installation steps of custom solid wood doors: 1. When installing the solid wood door, the first step is to place the components that need to be installed on the solid wood door on the gaskets laid in advance. 2. The next step is to assemble the door cover, use an electric hammer to make a hole at the door opening, and paste the anti-collision strip on the door cover. 3. Start to install the door frame, assemble the door frame with screws, and place it in the corresponding door opening after assembly. 4. Then start to install the door leaf. When installing the door leaf, it needs to be vertical, and at the same time, keep the corresponding distance from the door cover. 5. The next step is to install the door cover wire. When installing the door cover, you need to cut the door cover wire saw with a right-angled edge into an angle of 45 degrees, and you need to glue the door cover and the door cover line to each other. 6. The last part of the detailed tutorial on the installation steps of custom solid wood doors is to install the door lock, install the door lock according to the corresponding topic, check whether the switch is flexible after the installation of the door lock is completed, and also install the door bottom sealing brush, and this is done.
read more
scan to wechat
scan to wechat
