020-84858360
020-84858360
Good things have a standard, and this standard is recognized by everyone. If the item meets this standard, it is good, and everyone likes good things, because good things are used up, it is comfortable of. Do you know what is the standard of a good brush grommet wall plate? Let me tell you the good standards in the brush industry! 1. The installation should be simple. We all know that the brush grommet wall plate is installed inside the wall plate, a small wall plate may need to use the brush grommet wall plate, and usually the diameter is not too large, so the installation needs to be convenient and does not affect the use effect. 2. Accurate tolerance. The production is strictly in accordance with the standard. After installation, there is no obvious virtual looseness, no automatic sliding out, and no protruding installation notch due to the excessively long brush end, which has achieved a good assembly effect. 3. Use pure nylon wool yarn. Nylon's unique wear resistance and resilience are the reasons for choosing nylon material. An important function of the brush grommet wall plate is to pass the wire, and it can still maintain toughness and not deform during the long time when the wire is inserted, without frequent replacement. 4. Good tensile strength and no hair loss. Take brush grommet wall plate as an example. In the industry, the bottom width is ≥3mm, the tensile strength is ≥6kg; the bottom width is ≥4mm, the tensile strength is ≥10kg, and the interior of the wall plate can be cleaned, sealed and protected without linting. Good wire is not damaged. This is a good brush grommet wall plate standard. Which of the above points can your product meet?
read more
Huang Gong is an engineer of a sliding door manufacturer. During this period of time, the seal bottom of door brush wire used to seal and block dust under the door body was too hard, which not only scratched the floor but also increased the resistance, which made the sliding door work very well. It's not smooth, so Huang Gong has been trying to solve it. By chance, I learned about and consulted Aoqun through searching. After learning about the situation, Aoqun’s business manager Wang contacted Huang Gong, and after further understanding Huang Gong’s requirements, he suggested: "The hardness of the seal bottom of door can be adjusted by changing the diameter of the brush wire. , The smaller the seal bottom of door, the softer it will be. Aoqun is currently able to achieve each φ0.08mm level.” Later, according to Huanggong’s specifications and dimensions, the seal bottom of door sample will be sent for testing within 3 days. After receiving the seal bottom of door sample from Aoqun, Huang Gong immediately conducted a detailed test, and received feedback on the same day: "The test result is very satisfactory, the brush is soft and comfortable, and it is almost comparable to beauty brushes on the US market; The operation of the door is also very smooth and there is no resistance. Thanks to Aoqun for helping to solve the problem, and hope to reach a long-term cooperative relationship in the future.
read more
Recently, Aoqun business Anna received an email from Chinmay, the purchasing manager of the Indian Cabinet Company. In the email, Chinmay mentioned that he had recently received a complaint from a customer because the brush grommet panel 1 ru just installed by her company had a hair loss problem. Because they signed a quality assurance agreement, they had to install a new batch of brush grommet panel 1 ru for the customer, and decided to replace their existing supplier, and later found Aoqun. Anna dialed Chinmay's phone after receiving the email. Anna felt sorry for Chinmay's experience and shared similar customer cases. In addition, Anna also confidently introduced the company's brush grommet panel 1 ru production quality standard. For the bottom width ≥ 4mm, the required tensile force ≥ 10kg. And promise that the other party will receive a 60% deposit in advance for the first order, and the remaining balance payment will wait a week after the customer accepts the bulk goods. If there is any problem with the quality of the brush grommet panel 1 ru, the balance can be unconditionally accepted and will not be returned. After seeing that Anna's attitude was so firm, the other party also expressed that they chose to trust Aoqun and start the first cooperation. The two parties first confirmed the size and material of the brush grommet panel 1 ru, and Anna immediately sent samples to the other party for confirmation. After checking the quality of the samples, Chinmay thought that the quality of Aoqun's brush grommet panel 1 ru was very good, and soon sent a purchase order to Anna. Everything is going very smoothly, Chinmay also received this batch of 20,000 brush grommet panel 1 ru as scheduled. One week later, after the bulk inspection was completed, Anna received an email from Chinmay. He said that the quality of Aoqun's brush grommet panel 1 ru was indeed very good, and there was no hair loss problem. The balance was settled the next day. Say goodbye to the problem of hair loss, there is Aoqun brush grommet panel 1 ru.
read more
Ms. Jiang works as a purchasing manager for a large door manufacturer. Recently, she received a notice from the sales department to purchase a batch of draught excluders for doors with strong sealing. The customer paid great attention to the effect of dust prevention. Ms. Jiang, who received the notification, immediately contacted Aoqun, a long-term supplier. After Mr. Wang from Aoqun Business understands Miss Jiang’s current situation, he first consults Miss Jiang’s specific requirements for draught excluders for doors, and then quickly provides Miss Jiang with a solution, changing the original order product from PPΦ0.15 to PPΦ0.2. The reason is that the diameter is thicker and the thickness of the hair increases, so that the dustproof effect can be obviously prominent. Aoqun's brush products have passed ROHS certification technology, which can prevent 98.5% of air loss and have very strong sealing. Finally, Ms. Jiang asked Aoqun salesperson Mr. Wang to arrange the first sample. 13 days later, Ms. Jiang contacted Aoqun again, and she reported that the products had been delivered to the previous door and the products were very satisfied. Customers were full of praise. When buying draught excluders for doors, she only looked for Aoqun and was a good long-term partner without loss. Soon after, Ms. Jiang received an order for 50,000 meters down.
read more
There are many different products on the market of brush grommet for cable, so what is high quality? Aoqun tells you that precise size is one of the most important indicators. Choosing a brush grommet for cable with accurate specifications and sizes, you choose a good sealing and dust blocking effect, and the brush grommet for cable produced by Aoqun is one of the best. Aoqun has 20 years of experience in the production of high-quality and high-volume brush grommet for cable customization. It has 12 quality inspection links and 39 craftsmanship to create each brush grommet for cable; the precise size makes the brush grommet for cable fully fit the cabinet , To achieve seamless splicing; the installed cabinet has a very good sealing and dust-proof effect. Aoqun has customized a number of different brush grommet for cable bases, different brush grommet for cable specifications for the European, American, Southeast Asian and other markets, and each of them can meet the size and tolerance required by customers. The high performance-price ratio, the use of the cabinet brush grommet for cable with good effect has won the praise and trust of the majority of cabinet customers. Look for the brush grommet for cable with good quality and accurate size!
read more
Manager Ou is the manager of a decoration company. He has recently received a project for a new real estate and is responsible for the decoration of sample rooms and later real estate. Because it is a high-end residential area that uses wooden floors, the weather stripping for garage door used before has scratched wooden floors after being installed and used for a period of time. Now that he has received a written rectification letter from the real estate owner, Manager Ou is very headache. After searching for experts who knew about Aoqun, he brought samples directly to Aoqun. Mr. Chen from Aoqun received Manager Ou. After understanding the situation and carefully inspecting the original weather stripping for garage door, he found that the original brush wire was made of PP and the wire diameter reached 0.3mm. The PP itself was harder. If the wire diameter is too large, it will be thicker. Rubbing on the floor often, it will scratch the floor after a long time. Mr. Chen suggested that Manager Ou directly change the material, adopt more flexible and resilient PA material, and reduce the wire diameter to 0.2mm, which can fundamentally solve the problem of weather stripping for garage doors. Later, at the request of the manager of Europe, samples were sent for testing on the next day. 15 days after the weather stripping for garage door was replaced in the sample room, Manager Ou was affirmed by the developer because of the proper improvement of the weather stripping for garage door in the sample room, and directly signed the subsequent renovation contract. Manager Ou also decided to replace all weather stripping for garage doors with Aoqun, and placed an order for 100,000 meters.
read more
scan to wechat
scan to wechat
