Industrial brush deburring is a process that removes burrs on the surface of the workpiece by using the brush disc to rotate and instantly rub against the workpiece to generate cutting force. For workpieces with uneven surface within 100mm, the orifice, inner hole, step edge, surroundings and surface of the workpiece can be deburred by using the brush deburring machine. According to the different materials of the workpiece, choose different brush discs to deburr.

Cemented carbide is an alloy material made of hard compounds of refractory metals and bonding metals through powder metallurgy. It has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance, which basically remain unchanged even at a temperature of 500℃. It still has high hardness at 1000℃.

Therefore, the corner passivation processing of cemented carbide requires the use of Sweden BP-MX corner passivation polishing brush deburring machine. And cutting tool polishing, edge passivation, deburring processing. By changing the workbench or clamping method, it can not only process flat disk workpieces, but also passivate, polish and deburr the corners of shaft parts.

Flat or slightly concave-convex workpieces are evenly processed by abrasive brushes on a planetary light extraction table. Through the rotary motion of the worktable, the workpiece carrier and the brush, the corners of the workpiece in all directions are uniformly passivated and deburred. In this process, the upper surface of the workpiece is also polished simultaneously.

Modular design allows special combinations to suit customer's application; compound interchangeable table for maximum flexibility; dry or wet processing possible; automatic compensation for brush roller wear leads to consistency of results; can produce various edge shapes; fully enclosed working environment; touch-screen simple operation interface.