020-84858360
020-84858360
In March, I received an email from Albert, Sweden, and reported that the roof gutter brush I ordered from elsewhere had scratched the consumer’s wrist. There were a lot of potential safety hazards and I received complaints from customers. Ask us if we can help him solve this problem. Andrew, our gold sales customer service, responded promptly 1 minute after receiving Albert's email, and learned that both ends of the roof gutter brush that Albert had ordered at other supplier were actually cut off. After cutting the head and tail, it will be sharper, and the price will be relatively cheaper, and consumers will easily scratch if they are not careful. Andrew advised Albert to wear protective caps on both ends of the brush-because wearing protective caps on both ends is smooth, you don't need to worry about scratching. Albert is very satisfied, and paid sample fee, hope we will send the sample within 6 days. We sent the samples within 5 days. After receiving the roof gutter brush, Albert was very happy. He tested it immediately. He slid his hand on the protective cap and slid it back and forth. It was very smooth and did not scratch his hands, eliminating a great potential safety hazard. One week later, Albert ordered 20,000 roof gutter brushes from us and paid in full.
read more
Mr. Ren is the head of a chemical glass test tube company. Some time ago, he called Xiao Liu of the e-commerce department of Aoqun and said that test tube brush where to buy, the quality of the food-grade test tube brush provided by his company’s existing suppliers was not very good. After using it for a period of time, he found that there was filament loss; Now I'm looking for a manufacturer with guaranteed quality to cooperate, and ask Xiao Liu to visit him with a model to discuss cooperation matters. The next morning, Xiao Liu brought a sample to visit Mr. Ren, and introduced him to the food-grade test tube brush produced by Aoqun Company in detail. This product is made of pure nylon wool, with a rebound rate of up to 99.9%. The new PA has a tensile force greater than 72N, thus eliminating the phenomenon of easy filament loss; it has the characteristics of anti-ultraviolet and aging resistance; meanwhile, Xiao Liu tested Mr. Ren at the scene The original supplier's products found that the filament is insufficient in pulling force, which is prone to filament loss. Subsequently, Xiao Liu left a model for Mr. Ren to test. A week later, Mr. Ren called Xiao Liu and said: "The food-grade test tube brush samples provided by your company have been tested by the technical department and there is indeed no filament loss. The quality is good. I also recognized the quality of Aoqun. test tube brush where to buy, I choose Aoqun." Then, Mr. Ren placed 20,000 orders.
read more
A Dia from Kuwait called and said: "I am looking for a new supplier, because the current supplier flask cleaning brushes prices continue to rise but the quality has not improved significantly. I searched for you on Google, I know you are a manufacturer of flask cleaning brushes with more than 20 years of production experience, can you provide me with affordable flask cleaning brushes?" After understanding Dia's price requirements, our sales engineer Roger immediately responded to Dia: "Aoqun is a manufacturer with 20 years of experience focusing on the production of high-quality high-volume flask cleaning brushes, and the price is very competitive. And our flask cleaning brushes do not lose filament, fade, or deform, and have a long service life; the replacement frequency is small, and the service life is 10 times, which is equivalent to saving a lot of expenses." Then, Roger according to the specifications and target, recommend our hot selling models. However, Dia still felt too expensive, so Roger and Dia studied and discussed together according to their specifications and requirements, and controlled the cost from raw materials under the premise of good cleaning effect, and customized a new flask cleaning brushes for Dia to meet his target price. One month after receiving the goods, Dia called again: your flask cleaning brushes are not only of better quality than the previous suppliers, but also cheaper. Now my sales volume is bigger than before. Your profession and product quality are worthy of my trust, I will place another order."
read more
Mr. Huang is a manufacturer of various flasks and needs to use a large amount of 2000ml round bottom flask brush. The previously purchased 2000ml round bottom flask brush often has filament loss problems, but the feedback has not been resolved many times. Mr. Huang decided to change to a more professional brush factory. After listening to the introduction of his peers, Mr. Huang contacted Aoqun and learned that Mr. Huang needed to find a 2000ml round bottom flask brush that could not lose filament. Mr. Li told Mr. Huang: "Most filament loss in 2000ml round bottom flask brush is mostly due to a bad production process, and there is no tightening and insufficient pulling force. Aoqun is a high-tech company specializing in the production of 2000ml round bottom flask brush. The company has many specialties, and the products are all produced by German fully automated brush equipment to ensure that the 2000ml round bottom flask brush is well formed. Before the product is shipped, we will carry out a test to really achieve reliable quality." Mr. Li sent a 2000ml round bottom flask brush sample to Mr. Huang for comparison for the first time. Three days later, Mr. Huang formally placed an order for 10,000 2000ml round bottom flask brushes, and affirmed the samples of Aoqun. Mr. Huang's feedback: "I always thought that the flask brush is a product with no technical content. After listening to the detailed introduction of Aoqun, I learned that the flask brush also has a lot of technical content, so I chose to professionally 2000ml round bottom flask brush manufacturer, AOQUN."
read more
As a professional manufacturer of gutter brush guard, Aoqun once met such a customer. John, based in Australia, has long been too strong in ultraviolet rays and is still a country with a deciduous season. Because of the strong ultraviolet light, the gutter brush guard becomes brittle, which greatly reduces the service life of the gutter brush guard. Facing such problems, Aoqun has customized a UV-resistant gutter brush guard for Australian customers. The appearance of this kind of gutter brush guard does not seem to be different from other gutter brush guards, it must be different, it must go deep into the material. It is understood that the Gutter brush guard of the Aoqun is first produced with pure materials, and at the same time, the UV resistance is added, rather than the surface coating, do not underestimate this simple operation, this is exactly the success or failure. The anti-UV gutter brush guard of Aoqun has solved the problems of Australian customers well. According to their Australian customers, the gutter brush guard of Aoqun is not only not brittle but also durable. It used to be replaced every quarter, but now the frequency of replacement is reduced by half than before.
read more
Roger from New Zealand said he found Aoqun on Google. He wants to buy a batch of 1000 ml flask brush. Roger said that he had previously purchased from a manufacturer in China, but the quality of the 1000 ml flask brush was very poor, and it fell off after use and was not durable. In response, he was very angry and decided to change suppliers. Roger asked if Aoqun could provide a good quality 1000 ml flask brush. Our gold customer Omega told Roger that Aoqun is an expert in the manufacture of brushes and is the first manufacturer in China to formulate quality standards for brush products. It has received wide acclaim from customers in various regions of the world and has become a role model and customer bristle for its peers. Brush inspection standards. Aoqun's pig hair is even and thin, with a bristle thickness tolerance of ±0.2mm. The appearance is like laser cutting, neat, smooth and clean. No bristle loss, 10 times stronger than a strand of bristle. Roger was very happy after listening, and then sent us pictures and drawings of his large test tube. After 2 days, Aoqun made samples according to Roger's specifications and sizes, and after repeated testing and using it without lint, he sent a 1000 ml flask brush to Roger. A month later, Omega received another call from Roger: The feedback of this 1000 ml flask brush was very good after it was put on the market. It is simple and convenient to clean, and the cleaning effect is also very good. The important thing is that there is no bristle loss. Roger also said that he has received a lot of pre-orders from customers, and this brush has a promising future. He wants to place 8,000 orders.
read more
scan to wechat
scan to wechat
