Some syringe cleaner brush was scratched in the inner of the syringe, which brought a very bad experience to the customer, which led to a decrease in the order quantity. AOQUN learned that the Syringe cleaner brush head that purchased from another supplier was covered with plastic tip. It should not be scratched, but because of the diameter of the syringe became larger, the area to be cleaned is relatively large. If the brush head was scrubbed back and forth, it would scratch the inner wall of the syringe. Therefore, it was recommended to use a soft nylon syringe cleaner brush to clean the syringe without scratching the inner of the syringe. It was found that the cleaning effect of AOQUN syringe cleaner brush was very good and the inner of the syringe was not scratched.
read moreMr. Xu is a purchaser of a sliding door manufacturer. He has been very upset recently because he received complaints from the previous subway project. The reason for the investigation is that after using the long strip brush for a period of time, the filament loss occurs due to long-term friction, and the loss of the sealing effect leads to the leakage of the cold air, and is also very unattractive. Now that I have received a complaint from Party A, it is urgent to find a better supplier. Mr. Xu found AOQUN through a friend introduction. Mr. Wang of AOQUN received Mr. Xu. After understanding the situation, the sample of the long strip brush brought by Mr. Xu was tested. Firstly, the pulling force is only 3kg. The insufficient pulling force will cause filament loss under long-term friction and stress. The PP material is used for the long strip brush. It cannot be rebounded after sweeping and rubbing, and the deformation is serious. For the above problems, it can be solved from the material and replaced with a PA material with stronger flexibility and resilience. The tension will be larger when the number of filaments is increased. Then Mr. Wang also tested the existing long strip brush of the AOQUN, and the pulling force can reach 7kg. After that, Mr. Xu was happy to bring back the samples. On the third day after taking the sample of the long strip brush for the sliding door, Mr. Wang received a call from Mr. Xu: "Our leader is very satisfied. Now I have promised to replace the long strip brush of a station. If there is no problem. All of them use AOQUN’s long strip brush." Then there was an order of 1200 meters.
read moreOne customer needed to find syringe brush. The syringe brush that purchased by other manufacturers had scratched the syringe, in order not to affect the experimental results, all the scratched syringes have to be replaced, resulting in a huge loss. So, this customer asked AOQUN if they can make a syringe brush. It was learned that the syringe was scratched because the previous syringe brush had bad head process, which made it very easy to scratch the syringe during cleaning. AOQUN recommend Customer to use the softer fan-shape head syringe brush, to ensure a good cleaning performance and no scratches. After repeatedly tested and the customer found no scratching of Aoqun syringe brush.
read moreMs. Jiang is a purchaser in a large door factory. Recently, she received a notice from the sales department to purchase a batch of strip brushes nz. The customer pays great attention to the dust-proof effect. Miss Jiang, who was notified, immediately contacted the long-term cooperation supplier. AOQUN Mr. Wang, who is aware of the current situation of Miss Jiang, first consulted Ms. Jiang on the specific requirements for the strip brushes nz under the door, and then quickly provided a solution for Ms. Jiang, from the original product PPΦ0.15 to PPΦ0.2. The reason is that the diameter of the filament is thick and the density of the filament is increased, so that the dustproof effect can be conspicuous. AOQUN's strip brushes nz are ROHS 6 certified, which can prevent 98.5% of air leakage, and the sealing is very strong. Finally, Miss Jiang asked Mr. Wang to arrange for the first. 13 days later, Miss Jiang once again contacted AOQUN, feedback that the strip brushes nz has been delivered, the product is very satisfied, the customers are full of praise. AOQUN is a long-term cooperation partner.
read moreSome Customer are a large buyer, need to buy a large number of syringe brush cleaner, they concern: how much is your syringe brush cleaner price?” AOQUN explained to Customer that the price of our syringe brush cleaner was based on the size, material, process and quantity of brushes. Later, AOQUN got to know the size, material, process and quantity from Customer. AOQUN quote a reasonable price for them based on the information they provided. AOQUN’s price is a little higher than other suppliers, but the quality of syringe brush cleaner are better than theirs.
read moreOn August 15th, the customer service of Aoqun received a consultation from Miss Li, asking if AOQUN can customize the strip brushes uk? It turns out that Miss Li is doing business of automated logistics system equipment. The products used in the previous years caused the paint to fall off due to frequent friction, which not only damaged the appearance but also brought the peeling paint onto the goods. Now she hopes that the AOQUN can help solve it. After learning the situation, the manager of the business AOQUN, Mr. Chen, took the initiative to contact Miss Li and learned through communication: For the black conveyor belt on the matching equipment, the profile must use black. The aluminum profiles of the previous strip brushes uk are easy to paint off by spraying, so it is directly recommended that change to anodizing to form an oxide film on the surface of the aluminum profile by electrolytic oxidation to improve corrosion resistance. Improve wear resistance and hardness and protect metal surfaces. The sample was then sent to Miss Li. After receiving the strip brushes uk, Ms. Li carefully compared the test and found that it was not only beautiful in appearance, but also did not drop paint through repeated rubbing, so there was no need to worry about the paint falling on the goods and causing customer complaints. Then she directly placed an order of 1000 meters.
read morescan to wechat
scan to wechat