Strip Brush Study Case

  • Intimate Back Strip Brush Manufacturers - AOQUN

    Intimate Back Strip Brush Manufacturers - AOQUN

    2019-10-18

    Mr. Ou has recently encountered a problem, because the customer has specially customized a fast rolling door, the door gap is much larger than the previous gap, so the filament length of the brush has also changed. Because it was the first time to purchase a back strip brush, Mr. Ou did not hesitate to place an order with brush length change. As a result, after receiving the goods, he was surprised that the filament of the brush could not stand up and could not achieve the sealing effect.   Mr. Ou was annoyed by this because the supplier did not know the purpose of the product and the effect that Mr. Ou wanted to achieve when he placed the order. Mr. Ou felt that they were not responsible for the customer. Later, Mr. Ou found AOQUN Mr. Wang. After receiving the consultation from Mr. Ou, Mr. Wang first learned about the specifications of the brush that Mr. Ou had purchased in the past. Secondly, Mr. Ou made the measurement of the data of the door seam and finally decided to use 100mm total. Combined with the characteristics of the filament, and the effect that Mr. Ou wants to achieve, AOQUN changed the diameter of the filament from the original 0.15 to 0.3 mm diameter, and provided the sample to Mr. Ou for confirmation within 3 days.   Through Mr. Wang's professional recommendation, Mr. Ou quickly felt the professional and caring service of the AOQUN, so he immediately determined to order 500-meter back strip brush.

    read more
  • Looking for AOQUN Dust Strip Brush

    Looking for AOQUN Dust Strip Brush

    2019-10-17

    Recently, the technicist Jiang of a special vehicle manufacturer found AOQUN, asking if there is a dust strip brush. The reason is that there is a gap in the middle of the freezer compartment door, which makes the compartment has bad sealing effect, and also causes the external wind and rain to enter the compartment and cause damage to the cargo. Jiang wants to try to use the dust strip brush to block, so ask if the AOQUN can customize. Mr. Chen, who is responsible for the reception, communicated with Jiang in detail about the specifications of the compartment door and the size of the gap and the effect that needs to be achieved. It is directly recommended to use the h-shaped aluminum profile to be installed on both sides of the door, using φ0.3 mm filament to produce the dust strip brush to block the gap (the lateral installation requires a certain thickness); thus the crossover of the two sides of the brush can achieve the effect of sealing and blocking sand and rain. This proposal was also adopted by Jiang. Upon receiving the test results of the dust strip brush of the AOQUN, Jiang was very satisfied with the test effect. The sealing performance of the carriage was greatly improved, and the destroy of external wind and rain was avoided. Jiang decided to install the dust strip brush on all the refrigerated trucks, so the order for 10000 meters was placed directly.

    read more
  • High Quality Long Strip Brush – AOQUN

    High Quality Long Strip Brush – AOQUN

    2019-10-16

    Mr. Xu is a purchaser of a sliding door manufacturer. He has been very upset recently because he received complaints from the previous subway project. The reason for the investigation is that after using the long strip brush for a period of time, the filament loss occurs due to long-term friction, and the loss of the sealing effect leads to the leakage of the cold air, and is also very unattractive. Now that I have received a complaint from Party A, it is urgent to find a better supplier. Mr. Xu found AOQUN through a friend introduction. Mr. Wang of AOQUN received Mr. Xu. After understanding the situation, the sample of the long strip brush brought by Mr. Xu was tested. Firstly, the pulling force is only 3kg. The insufficient pulling force will cause filament loss under long-term friction and stress. The PP material is used for the long strip brush. It cannot be rebounded after sweeping and rubbing, and the deformation is serious. For the above problems, it can be solved from the material and replaced with a PA material with stronger flexibility and resilience. The tension will be larger when the number of filaments is increased. Then Mr. Wang also tested the existing long strip brush of the AOQUN, and the pulling force can reach 7kg. After that, Mr. Xu was happy to bring back the samples. On the third day after taking the sample of the long strip brush for the sliding door, Mr. Wang received a call from Mr. Xu: "Our leader is very satisfied. Now I have promised to replace the long strip brush of a station. If there is no problem. All of them use AOQUN’s long strip brush." Then there was an order of 1200 meters.

    read more
  • Buying Strip Brushes NZ Only Recognizes AOQUN

    Buying Strip Brushes NZ Only Recognizes AOQUN

    2019-10-15

    Ms. Jiang is a purchaser in a large door factory. Recently, she received a notice from the sales department to purchase a batch of strip brushes nz. The customer pays great attention to the dust-proof effect.   Miss Jiang, who was notified, immediately contacted the long-term cooperation supplier. AOQUN Mr. Wang, who is aware of the current situation of Miss Jiang, first consulted Ms. Jiang on the specific requirements for the strip brushes nz under the door, and then quickly provided a solution for Ms. Jiang, from the original product PPΦ0.15 to PPΦ0.2. The reason is that the diameter of the filament is thick and the density of the filament is increased, so that the dustproof effect can be conspicuous. AOQUN's strip brushes nz are ROHS 6 certified, which can prevent 98.5% of air leakage, and the sealing is very strong. Finally, Miss Jiang asked Mr. Wang to arrange for the first.   13 days later, Miss Jiang once again contacted AOQUN, feedback that the strip brushes nz has been delivered, the product is very satisfied, the customers are full of praise. AOQUN is a long-term cooperation partner. 

    read more
  • Strip Brushes UK, AOQUN Is Your Best Choice

    Strip Brushes UK, AOQUN Is Your Best Choice

    2019-10-14

    On August 15th, the customer service of Aoqun received a consultation from Miss Li, asking if AOQUN can customize the strip brushes uk? It turns out that Miss Li is doing business of automated logistics system equipment. The products used in the previous years caused the paint to fall off due to frequent friction, which not only damaged the appearance but also brought the peeling paint onto the goods. Now she hopes that the AOQUN can help solve it.   After learning the situation, the manager of the business AOQUN, Mr. Chen, took the initiative to contact Miss Li and learned through communication: For the black conveyor belt on the matching equipment, the profile must use black. The aluminum profiles of the previous strip brushes uk are easy to paint off by spraying, so it is directly recommended that change to anodizing to form an oxide film on the surface of the aluminum profile by electrolytic oxidation to improve corrosion resistance. Improve wear resistance and hardness and protect metal surfaces. The sample was then sent to Miss Li.   After receiving the strip brushes uk, Ms. Li carefully compared the test and found that it was not only beautiful in appearance, but also did not drop paint through repeated rubbing, so there was no need to worry about the paint falling on the goods and causing customer complaints. Then she directly placed an order of 1000 meters.

    read more
  • Metal Strip Brush Credible Manufacturers – AOQUN

    Metal Strip Brush Credible Manufacturers – AOQUN

    2019-10-12

    Mr. Zhu from Guangzhou is a manufacturer of desk grommets. Recently, he found that the thickness of the metal strip brush was actually getting thinner and thinner. Although the size has consistently met the installation requirements, the sealing effect has been greatly reduced. He suddenly realized that it was the supplier who offered him a price increase some time ago. Because the price increase was not successful, he even quietly reduced the brush thickness. Mr. Zhu was very angry about this behavior, decided to look for another supplier.   Through the business card review, Mr. Zhu found that AOQUN Mr. Wang has been in constant contact with him, so he first thought of letting Mr. Wang provide samples and quotes for him. After receiving Mr. Zhu’s request, Mr. Wang immediately sent three kinds of materials and two kinds of thick metal strip brushes according to Mr. Zhu’s request, and separately priced them. In order to confirm the sample, Mr. Zhu can also do sample return and sample retention. After receiving the samples, Mr. Zhu was very moved by the details and immediately placed an order of 500 meters.   So far, Mr. Zhu has been working with AOQUN for more than seven years of metal strip brush. Because of Mr. Wang honest and considerate service, Mr. Zhu’s distribution business department is spread all over the country.

    read more
[  A total of  155  pages]
strip brushes
bottle brushes
got free inquiry now please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!