020-84858360
020-84858360
We may be unfamiliar with the gutter worm brush in China, but it is in common use in foreign countries. You can see the gutter worm brush in the below picture. Some people may think it is the same as the ordinary brush when they give a glance to the picture. Yes, you are right, gutter worm brush is one of the twisted brushes. However, gutter worm brush has the specified diameter to suit almost every standard gutter of the roof, it is 3.25 inches in minimize, 4.25 inches, 5.25 inches, 6.5 inches and 8 inches in maximize. You can customized the length of the v according to your roof gutter.The installtion is so easy, you can just follow several steps, we will talk later in the other article. The roof gutter is clogged by leaves. The roof gutter is clogged by waste water The Magical Effect of The Gutter Worm Brush: 1. Keeps gutters flowing to prevent clogged gutters and water damage 2. Helps prevent icicles and ice dams, protec our personal safety 3. Reduces or eliminates dangerous, messy, expensive gutter cleaning AOQUN can customize all kinds of gutter worm brushes and provide the installtion guideline for you. AOQUN is the confidence assurance for your purchasing brushes with us.
read more
If you have never heard of the anti-rodent brush, then you are too out. The anti-pest company has start using this product to prevent mice in the building 10 years ago. The anti-rodent brush is very cheap but have the special anti-rodent effect on mice, especially for the mice which like to bite the wires and cables and destroy the communication equipment. The anti-rodent brush contributes most on anti-rodent. The anti-rodent brush usually is installed on a pipe/tube where mice visit often. The good quality anti-rodent brush has symmetrical bristle, feel like stiff and prickly, thus the mice will escape when see the anti-rodent brush. In addition, the shaft is very rigid so the mice cannot push it out. Therefore, it can reach the best anti-rodent effect. AOQUN anti-rodent brush is made of new PA/PP bristle, which distribute evenly. The shaft is twisted by 304 stainless steel to anti-rust, especially suitable for long-term effect of rodent control.
read more
We can see an expensive musical instrument composes of many small parts, which will play a great role in the sound production (See from below picture). So every part must be protected. The three valve ports is usually cleaned with a custom trumpet cleaning brush, and the part of the tuning slide needs to be cleaned with a flexible musical instrument brush. AOQUN can provide you with a set of trumpet cleaning brush set. AOQUN matching trumpet cleaning brush can ensure the cleanliness of the brass instrument mouth. It uses a 304 stainless steel as wand, with the soft and hard moderate pure nylon filaments, which are neat cut, will not loose or hurt the hand. Use nylon brush material to replace the cotton thread, to avoid the cotton thread leaving in the brass instrument mouth ultimately. The player can choose a flexible trumpet cleaning brush to clean the slides, for it is bendable enough to avoid scratching the musical instrument. AOQUN can match a suitable musical instrument brush for you for free! Remember to coat the brass instrument with lubricant in for maintenance after cleaning, so as to keep the musical instrument in a clean and ideal state. Buy the reliable musical instrument brush, AOQUN is your first choice!
read more
Having a saxophone is a glorious thing for music lovers. To make the beloved saxophone to maintain a good sound effect for long term, some may neglect the daily care of the saxophone. I will advise you how to maintain the saxophone in the following: First of all, you cannot be without the mouthpiece cleaning brush, it is an important cleaning tool for the saxophone tube cleaning. The brush filament, which is moderate hardness, can increase the cleaning effect without scratching the instrument's inner tube or affecting sound quality. You also need to use the cleaning tools as shown below： Let me simply talk about the cleaning steps: 1, firstly, take the reed to wash with the absorbent paper to dry the water, and then put it into the reed card. Clean the mouthpiece with a mouthpiece cleaning brush, wipe dry and install the whistle clip, cover the flap head and put it back in the box. 2, Release the screws of the neck tube, remove the neck tube with a mouthpiece cleaning brush to clean the tube for water inside and dirts (not water rinse); then use absorbent paper to absorb the moisture on the cork and coat it with a layer of wax. 3, Use the outer tube cleaning cloth to wipe the dirt and debris of tube and the tube connecting parts, do not put the used cleaning cloth or mouthpiece cleaning brush together with the instrument to prevent the moisture retention in case the leather pad becomes molding or swelling. 4, Put the absorbent paper between the leather pad and the sound hole, gently press to stay for two to three seconds to dry the water, and then gently press the lid to pull out the absorbent paper cleaning the mouth stains (each key should be cleaned). Do not let the scraps of paper stay in the sound mouth to avoid leakage. 5, Every two months, please fill in the button joints of a little oil, do not miss any joints as the saxophone has many joints. But do not fill it with too much oil to prevent the key oil flow on the saxophone tube, leading to early oxidation of paint, and then make vibration cork peel off. It will affect the playing effect. 6, Finally, wipe the surface with a cleaning cloth to get rid off the dirty oil, please pay attention to needle spring, do not prick you hand. For more musical instruments cleaning brush, you are welcome to consult AOQUN at any time!
read more
Tracheal intubation is an important rescue technique commonly used in first aid. It is one of the most widely used and effective methods in respiratory management. It is also the basic skill that medical staffs must master in order to save the life of patients and reduce the mortality rate. So what is the main tube of tracheal intubation? Look at the below picture! Tracheal intubation is an elongated hose that requires a suitable endotracheal cleaning brush to clean the cannula. We may have the wrong opinion that it is just a simple endotracheal cleaning brush, we can easy to find one. NO, NO, NO, it isn’t. I believe we all know that these tracheal intubations are directly in contact with the human body, so we also have strict quality requirements for the endotracheal cleaning brush. If we made the endotracheal cleaning brush by normal brush filament, it will lose color, filament, or has very stiff filament, etc. It will damage the inner of the pipeline.and if there are residual endotracheal cleaning brush filament in the pipeline, serious things may happen. I will tell you what material AOQUN endotracheal cleaning brush is made by. 1. Firstly, it is made of FDA endotracheal cleaning brush filament which reached the food safety grade, can directly contact with human bodies with damage. 2. The shaft is 304/316 stainless steel, no rust. 3. Offer different diameter of the endotracheal cleaning brush according to the size of the cannula, in order to identify the different diameter of the brush more easily. 4. The Loop can be added colored beads to identify the different diameters, nice and easy to use! AOQUN is the first brush manufacturer to pass the ISO certification in brush industry. Our products complies with the RoHS 10 items, SVHC 169 items, FDA certification. AOQUN is your preferred endotracheal cleaning brush manufacturer absolutely!
read more
The CPAP tube is the channel between the CPAP and the patient with dyspnea. As the only main road for gas interaction, the wet CPAP tube can easily accumulate dust, breed and leave over the bacteria in it, aggravate the dyspnea. However, the CPAP tube brush is flexible and can clean the angle of the curved tube up to 90°. After unfasten the spring CPAP tube brush, it will automatically extend and can clean the 1 time longer CPAP tube. The CPAP tube brush can thoroughly clean the inner CPAP hose of various lengths, and provide the patient with a clean and odorless breathing environment, which will bring a pleasant breathing experience. The stainless-steel steam is twisted with the pure nylon filament, which is so soft to touch with ultra-high precision of the tolerance ± 0.02mm. The CPAP tube can be recycled after cleaning, help to reduce more than 50% cost of CPAP tube brush for patients. The sourcing, processing, packaging, quality control are throughout the whole process, AOQUN deserve ourselves for 10 years of research and development, design, production of CPAP tube brushes. Our CPAP tube brushes are tasteless, environmentally friendly and safe, which comply with SVHC and RoHS authentication.
read more
scan to wechat
scan to wechat
