Medical Brush

  • AOQUN Surgical Instrument Brushes Scratching? NEVER!

    AOQUN Surgical Instrument Brushes Scratching? NEVER!

    2019-09-18

    Culver from Germany sent us an enquiry through Alibaba. He said that they want to buy a surgical instrument brushes. They have also purchased it before, but the brush head they purchased before has scratched the bottom of the surgical instrument, causing them a great loss.   We asked Culver to send us their previous surgical instrument brushes so that we could help them analyze the problem and better solve the problem. After receiving the Culver sample, we found that their previous brush was too thin, so that the head became thinner after getting wet, revealing the stainless-steel wire inside. When the surgical instrument brushes is used for cleaning, the stainless steel is in direct touch with the bottom of the surgical instrument and is scratched. We customized a brush for Culver with a 50% increase in filament thickness and sent it to him.   Culver received feedback after receiving the samples. They liked our surgical instrument brushes. After the experiment, they found that the problem of scraping the bottom was solved and the brush head was very soft. They finally ordered us 3,000 brushes.

    read more
  • About the Shaft Material Selection of The Surgical Wire Brush - AOQUN

    About the Shaft Material Selection of The Surgical Wire Brush - AOQUN

    2019-09-17

    Surgical wire brush are used as tools for cleaning surgical instruments, and the shaft material selection is also critical. If the quality of the material is poor, it may affect the cleaning effect, the results of the next experiment, and even may pose a safety hazard. Today we will talk about the importance of steel wire selection.   It is well known that surgical wire brush is generally made of a combination of filament and steel wire. The steel wire of the brush generally are stainless steel, rubberized wire and iron wire. In the comparison of the three kinds of wires, the best quality is stainless steel, followed by the rubber line and the last wire. The instability of the wire will cause rust after a long time and multiple cleanings. If the rust falls or remains in the surgical instrument, many adverse consequences will occur. The rubberized line is a rubber sleeve on the basis of the iron wire to isolate the direct contact between the iron wire and the water, but the rubber layer outside the rubberized wire will be abraded after a lapse of time. The stability of the stainless-steel wire is the strongest and it is not easy to rust.   AOQUN surgical wire brush is generally made of stainless-steel wire because it has the best stability, reduces safety hazards, and has a longer service life. 

    read more
  • Precautions For The Use Of Wire Brush Medical - AOQUN

    Precautions For The Use Of Wire Brush Medical - AOQUN

    2019-09-16

    Many customers asked us how to use the wire brush medical properly. AOQUN can tell you.   The following details should be noted:   First, pay attention to match the instrument diameter and the wire brush medical diameter, too large is easy to crack the instrument;   Second, the brush should be washed first with water residual liquid in the instrument, please pay attention to excessive force during brushing to prevent crushing or puncture the bottom of the instrument; in addition, if the pressure is too large, it will reduce the service life.   Third, when the instrument has acid or alkali or corrosive drugs, it should be diluted or rinsed before using the wire brush medical, then rinsed with water and suspended for drying.   Fourth, if necessary, add detergent to wash. Then put the brush back in place and buckle it on the instrument rack.   AOQUN brush not only protects the instrument, but also greatly prolongs the service life. We are an expert in making wire brush medical. AOQUN will be the long-term supplier of you.

    read more
  • Customized Multi-Standard Wire Instrument Brush - AOQUN

    Customized Multi-Standard Wire Instrument Brush - AOQUN

    2019-09-12

    If you need a number of different wire instrument brush with various sizes, and can not find a manufacturer that can be customized, then AOQUN can help you.   AOQUN is a professional brush manufacturer with 11 years of high-volume high-quality wire instrument brush customization experience. The project manager can provide a customized solution in 8 hours, the sample is completed within 2 day. The factory pass rate is ≥99.5%, and the customer satisfaction is ≥95%. In addition, AOQUN has 12 quality inspection and strict quality management procedures.   In order to better and faster solve the needs, you should send the pictures and drawings of the wire instrument brush you need and the application scene. After receiving the information, colleagues from AOQUN Technology R&D department generally completed the sample proofing within 2 days according to the drawings.

    read more
  • Medical Device Brush Can Avoid to Scratch the Medical Device

    Medical Device Brush Can Avoid to Scratch the Medical Device

    2019-09-11

    Kem from the United States needs to find a brush. The medical device brush that was previously purchased from another house scrapes the medical device, causing the customer to return the product, and the order quantity is decreasing. Kem asks if AOQUN can help him customize one. Avoid brush to scratch the medical device.   Our gold customer, Mary, responded promptly after receiving the customer's mail for 1 minute, and Kem also sent us the size and picture of the previously purchased medical device brush. From the data we know that the length of the brush head is very short, only 20mm. Mary suggested that the length needs to be increased to 40mm and needs to be thickened so that the skeleton can be better hidden and the skeleton can’t touched to the bottom of the brush. Kem is very interested in Mary's suggestion and pays the usd90 sample customization fee. After 5 days, we sent the medical device brush sample.   After 3 days, Kem received the brush and arranged the test for the first time. He was very satisfied with the test results. We soon received 20,000 medical device brush orders on the same day.

    read more
  • What Is Brush Medical? - AOQUN

    What Is Brush Medical? - AOQUN

    2019-09-10

    What is brush medical? Brush medical is a cleaning brush that clean medical instruments such as endoscope. Where is the good cleaning effect brush medical?   Aoqun is a manufacturer of high-quality large-volume brush medical custom, has more than 11 years of customization experience; products are exported to more than 50 countries in the world. The country has obtained more than 30 EU and industry certifications, providing customized brushes for more than 20 leading companies in various industries. The R&D team has rich experience.   What is brush medical? It is very suitable to clean small medical instrument. It won't be too big because the diameter is small, and the cleaning effect is good. 

    read more
< 31 32 33 34 35 36 37 38 39 40 >
[  A total of  51  pages]
strip brushes
bottle brushes
got free inquiry now please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!