A customer said that when he bought the endoscopy brushes before to clean his endoscopy, the bottom of the endoscopy was always dirty, which bothered him for a long time. What Kind of endoscopy brush can clean his endoscopy perfectly? Does it have any endoscopy brushes cleaning policy? Through product drawings, we know that his glass endoscopy mouth is narrow. We manufactured a lot of similar endoscopy brushes before. We also learned that the head process of the endoscopy brushes was tying, so it could not clean the bottom of the endoscopy perfectly. The endoscopy brushes cleaning policy is that AOQUN follows the drawings and makes the twined coil head process, which is the most appropriate for cleaning. A week later, AOQUN received The customer email again, saying that it’s the first time he saw this endoscopy brush with twined coil process, it was very special, the endoscopy brushes cleaning policy is good. The most important thing is that it can completely clean the debris on the bottom of the endoscopy.
read moreMr. Xie is a brand customer of industrial doors and needs a large number of brush strip sealing systems every year. Because Mr. Xie's products are used in Southeast Asia, where the area is relatively humid and seawater is poured, the brush is rusted. Mr. Xie also received some complaints from customers. The customer has not returned the order. Mr. Xie is very upset about this. Listening to the introduction of his friend, he learned that AOQUN is a professional manufacturer of industrial dust-proof brush strip sealing systems. Mr. Xie decided to visit AOQUN and seek solutions to the problem of brush rust. AOQUN Mr. Zhao received Mr. Xie. Through communication, it is analyzed that there are two reasons for the rust of the brush strip sealing systems: 1, The 304 stainless steel is not pure material, there are additives, so there will be rust phenomenon; 2, Due to the special characteristics of the use of the area, there is seawater infusion, then you should use better stainless steel, Mr. Zhao recommended that Mr. Xie directly replace 316 stainless steel. AOQUN has 316 stainless steel brush samples, can let Mr. Xie take the on-site test. Finally, Mr. Xie took the 316 stainless steel brush sample to test whether it rusted. After 15 days, Mr. Xie called and said: "I have tried the brush samples, no rust. My previous brush strip sealing systems were rusted after more than 10 days of seawater erosion. It seems that 316 stainless steel is sure to meet my brush strip sealing system requirements. Thank you for providing me with professional advice, let me take less detours. I will place the next batch of orders.”
read moreA customer said that he bought the endoscopy cleaning brush. After cleaning, the bottom of the endoscopy was always not clean. Through the product drawings, AOQUN have also done a similar endoscopy cleaning brush before, so it is completely no problem for AOQUN to customize another one for Alex. AOQUN also learned that the head process was a fan-shaped before, it was not able to clean the bottom of the endoscopy. AOQUN made some samples according to the drawings and finally customized the suitable brush head. Two weeks later, AOQUN received an email from the again saying that it’s the first time he saw the endoscopy cleaning brush was very special. The most important thing is that it is so simple, convenient and easy to clean, completely solves the problem. At the same time, they have also received the favor of other customers.
read moreMr. Liu from Chongqing recently called AOQUN to order a brush strip draught excluder. The bristles of the brush strip draught excluder supplied by the previous supplier are always uneven, and often problematic. Now through the introduction of friends, they found AOQUN. In response to this problem that Mr. Liu has appeared, AOQUN salesman Xiao Zhang said that according to our production experience in the industry, we are not only using fully automatic machine shearing, but also will carry out secondary flying and packaging. We will also manually trim the brush strip draught excluder again. To ensure that the brush is neat, it will also be checked and inspected to ensure that the brush strip draught excluder is neat and not deformed. It is possible to prevent the filament from being irregular. After listening to our introduction, Mr. Liu asked us to send a sample according to the requirements. We sent out the sample after 3 days. Five days later, Mr. Liu called to make a brush strip draught excluder. He said that the neat texture of the sample was so good, and he was relieved. He directly ordered the 1800-meter brush strip draught excluder.
read moreA customer said that he recently received complaints from customers that the flexible endoscope cleaning brushes didn’t have a good cleaning performance and scratched the endoscope, result in the cargo returned and he lost a lot of money. The customer sent the drawings of the endoscope to us. AOQUN immediately discussed and offer 4 solutions. Finally, AOQUN made four flexible endoscope cleaning brushes with different head process according to The customer's drawings. After testing for many times, AOQUN found that the flexible endoscope cleaning brushes with twined coil process had excellent cleaning performance and not scratched the endoscope. Finally, AOQUN sent this flexible endoscope cleaning brushes sample to The customer. After 7 days, AOQUN received a call from The customer:The flexible endoscope cleaning brushes samples AOQUN sent were excellent and the market feedback was very good. He didn’t receive a customer complaint any more. The customer eventually purchased 8,000 units from us.
read moreSome time ago, I received Miss Jiang. She said that the brush strip for roller doors are sparse and leaky. It does not meet the customer's acceptance criteria. It often needs to be returned and reworked. Seriously affected the production schedule of the workshop, resulting in delay in delivery. After deciding from the company's deliberation, she would like to take this opportunity to re-select the quality supplier cooperation. Because AOQUN is a large manufacturer of brush strip for roller doors, the company is equipped with professional production equipment and technical production personnel. AOQUN will make corresponding filament thickness requirements for different products to ensure the density of the product. After the production is completed, there will be professional packaging personnel to strictly control the quality of the products. On the same day, AOQUN gave Miss Jiang a sample of 5 brush strip for roller doors. Three days later, AOQUN received a call from Miss Jiang, saying that after the inspection of their customers, she felt that the thickness of the brush strip for roller doors of AOQUN is even and uniform, which fully met their acceptance criteria. Ms. Jiang expressed her satisfaction.
read morescan to wechat
scan to wechat